PDA

View Full Version : Small Block Chevy 383 - 40 Over

Ram Racing
12-29-2009, 10:05 AM
ORIGINALLY EARLY MODEL 350 CI 4 BOLT MAIN CHEVY PASSENGER CAR BLOCK
BLOCK COMPLETE MACHINE SHOP INSPECTED/PASSED
BLOCK CLEANED & BORED 40 OVER
NEW CAM BEARING/FREEZE PLUGS
NO RUST INSIDE WATER INLETS
BRAND NEW EAGLE 383/3750/5.7 2 PIECE EXTERNAL CAST STEEL CRANK 500HP BALANCED
BRAND NEW EAGLE 5.7 (SIR) 500HP BUSHED RODS
BRAND NEW KEITH BLACK 383/40 OVER (10.8-14.2) .150 DOME PISTONS
CHROME MOLLY PISTON RINGS
CLEVITE PERFORMANCE BEARINGS ROD/MAINS
NEW HIGH-VOLUME OIL PUMP/PICK-UP
NEW 400 EXTERNAL 168 TOOTH SFI-29.1 DOUBLE WELDED STARTER RING FLEXPLATE
NEW HIGH COMPRESSION RACING STARTER 1.9 HP/4.1 GEARS
NEW 7 QUART OIL PAN DRIVER SIDE OIL DIPSTICK
NEW 555/264 HYDRAULIC CAM/LIFTERS
NEW PROFORM GEAR DRIVE KIT
NEW CHROME TIMING CHAIN COVER
NEW EDELBROCK PERFORMER ALUMINUM HEADS 64cc 202/160 (575) LIFT HEADS
FELPRO HEAD GASKETS
NEW ELDEBROCK PUSH RODS/HEAD BOLTS GUIDE PLATES
NEW CHROME CAST ALUMINUM VALVE COVERS RED FLAMES
40 OVER/150 DOME PISTONS 64cc HEADS 11-1 COMPRESSION
383CI 40 OVER


CALL DAVID FOR MORE INFO 429-6692
RAM RACING
$3,000.00 FIRM
Ram Racing
01-02-2010, 10:21 AM
http://i615.photobucket.com/albums/tt240/Udrive/014.jpg?t=1262466963

date not set on camera... call for more pics.
5678TA
01-03-2010, 02:34 PM
Its a 385 CI. Same size i was running. A 383 is .030" over, .040" over is a 385. just for your info. good luck with the sale.

and another thing i noticed, you might want to check on the compression ratio. i had 11:1 with flat tops (slightly negative dome and 64cc heads). those dome pistons will push it into the 12.0-12.5:1 range.
Ram Racing
01-04-2010, 04:20 PM
Its a 385 CI. Same size i was running. A 383 is .030" over, .040" over is a 385. just for your info. good luck with the sale.

and another thing i noticed, you might want to check on the compression ratio. i had 11:1 with flat tops (slightly negative dome and 64cc heads). those dome pistons will push it into the 12.0-12.5:1 range.
thanks!... sorry about that, this was copied and pasted from an email. i'll be sure to proof read in the future. :o

calculator for engine displacements http://www.csgnetwork.com/cubicinchcalc.html
5678TA
01-04-2010, 06:57 PM
its all good. good luck with the sale
Ram Racing
03-14-2010, 09:34 AM
*sold*